• Wood Pellet manufacturers in Chennai, Tamilnadu

Wood Pellet manufacturers in Chennai, Tamilnadu

Wood Pellet manufacturers in Chennai, Tamilnadu- XLNT Thermal Technologys  was established and commenced trading in 2014. It is now a well-established manufacturing and dealers  company based with wood pellet and wood chip.

During this period of growth it was evident that wood pellet deallers generated a lot of waste in the form of sawdust and wood off-cut waste.

Chennai is a popular location for wood pellet  manufacturing; there are in excess of 200,000 producers within this central  regency. Consequently a considerable quantitis of this type of waste is generated by the many companies located within the area.

Customary disposal is by burning the waste and it was clearly evident that a more environmentally acceptable and responsible method of waste management could be implemented.

It proceed to explore the potential for the use of this waste and seek an acceptable solution.

For more details for reference:  www.xlntthermaltechnologys.com  is the official website of XLNT Thermal Technologies. We are the oldest and largest pellet manufacturer in Chennai, Tamilnadu. We take a big pride in the quality and craftsmanship that we put into our product.

Most applications of briquetting in the iron and steel industry involve waste materials, such as mill scale and process dusts, sludges, and filter cakes.

Learn More

SIGMA THERM-F

Sigma T H E R M® F is a thermally stable food grade heat transfer fluid. It is recommended up to 320 °C bulk oil temperature into closed loop heat transfer system.

Formulation of sigma T H E R M®- F is based on all ingredients complies with US FDA, chapter 21 CFR, 178 .3570.

SIGMA THERM FF-101: Additives does not form any viscous or solid deposits that lead to fouling on heat exchanger surfaces or clogging of the heat transfer circuit. It is used to correct these types of problems.

Benefits:

  • High Thermal Stability
  • High Specific Heat
  • Very low carbon deposits
  • Low Volatility

1 ton of pellet is equal to

120 gallons of heating oil     –     16,000 ft of natural gas

170 gallons of propane        –     4,775 kilowatt hours of electricity

For visit us our location

Our Products

SYNTHETIC THERMIC FLUIDS

Our entire ranges of products are known for quality and durability.

HYDRAULIC OIL

Our entire ranges of products are known for quality and durability.

DE-CARBONIZING CHEMICALS

Our entire ranges of products are known for quality and durability.

FOOD GRADE THERMIC FLUIDS

Our entire ranges of products are known for quality and durability.

THERMIC FLUID PUMPS

Our entire ranges of products are known for quality and durability.

BIO-FUELS

Our entire ranges of products are known for quality and durability.

FAQs About Wood Pellet manufacturers in Chennai, Tamilnadu

The production of wood pellets begins with the generation of the raw material.

In most cases this raw material is a byproduct of some other wood processing operation. Hardwood flooring mills are one example: They produce large quantities of clean (no bark or dirt), dry sawdust and small scrap blocks in their operations.

This byproduct makes an ideal raw material for pellet production; however, as the interest in pellet production grows, some mills are generating pellet-making raw materials directly from trees (i.e. “round wood”).

Wood pellets are generally burned for heat, although they may also be used to generate process steam and/or electricity.

Generally, if stored in a cool, dry place, wood pellets can last anywhere from six to twelve months. If you live in a high humidity environment, they may only last for three or four months. And, if the pellets are not of the best quality, they may only last for a month or two.

According to the requirements of their terms of different standards, about the wood pellets quality standards we should consider the following crucial indicators：

  • Ash content. We clearly understand wood pellets are generally for heating. …
  • Moisture contend
  • Bulk density
  • Diameter and length
  • Durability

Pellet stoves that are certified by the EPA are likely to be in the 70% to 83% efficiency range. Pellet stoves have heating capacities that range between 8,000 and 90,000 Btu per hour.

Wood pellets can go bad, but if properly stored will last over long periods of time. Pellets deteriorate only when exposed to the elements – mainly moisture – and will be of no use once damp. Keeping your wood pellets cool and dry is essential to their longevity.

The common pellets are made from woody biomass, like sawdust, wood chips or forest residues, but there are a variety of raw materials which can be pelletized.

Examples are  paper products, waste biomass, corn, cotton seed, hemp, miscanthus, reed canary grass, straw, cereal spillage, low grade hay etc.

Using only the best quality hardwood sawdust assures the highest consistent BTU output, resulting in Purest pellets being the hottest burning, longest lasting and cleanest burning hardwood pellet on the market today.

Soiled wood pellets are compostable. Soiled wood pellet litter can be composted and can decompose naturally. This reduces household waste. Additionally, compost can be used to enrich soil.

Wood pellets are a highly absorbent bedding, made from soft wood. They are dust free, as they absorb large amounts of wet, and are designed to be used for deep litter.

No flare-ups: Because wood pellets use indirect heat, there won’t be any hazardous fire flare-ups that can scorch your food.

Best Hardwood Pellet Flavors for Pellet Grilling

Maple

Hickory

Mesquite

Cherry

Apple

Alder

Pecan

Oak. Oak wood pellets, for instance, impart a well-balanced smoky flavor that’s quite versatile, but complements beef and seafood particularly well. If any requirement of wood pellet contact us: 87787 98284

Designed & Developed by