Application:

IPOL Hydropac AW oils are recommended for use in high pressure hydraulic systems  (1000 psi and above) and also in systems where high speed actuations are desired. Such  oils are extensively used in CNC and special purpose machines as also in positive  displacement pumps Axle, Piston, Vain and gear tight. These can also be used in small gear  boxes, compressors, chain drives and circulating oil systems machine tools etc. These are  not recommended for lubrication of turbines and equipment’s having silver coated  components.

IPOL Hydropac AW Oils

Anti-wear type hydraulic oils

Description:

IPOL Hydropac AW oils meeting ISO VG-32 to 150 requirements are blended using high viscosity index, chemically stable, virgin base oils and specially selected anti-wear, anti- oxidant, antirust and anti-foam additives.

Product formulated to meet following standards,

  • IS 10522 – 1993 (Re-affirmed)
  • DIN 51524 Part 2 & 3
  • Vickers I-286-S & M – 2950
  • IPSS : 1- 09-022
  • U.S.Steel 127, 136
  • Vickers V-104C Vane pump test
  • Denison HF-0, HF-1, HF-2
  • Cincinnati machine P-68, P-69, P-70

Benefits:

  • Least wear of pump components, valves, cylinders, pistons etc.
  • Rust protection to system internals.
  • Good demulsibility to allow entrained water to settle down.
  • Resistance to foaming to ensure prompt functioning.
  • Longer service life through extension in oil change periods.
  • Reduction in inventory as these are multipurpose products

Product Data Sheet:

Characteristics

 

Properties

  

Methods & Units

 Typical Test Value
AW AW AW AW AW
32 46 68 100 150
 

Appearance

  

Visual

  

Bright & clear
Colour ASTM D 1500 2.5 2.5 4 4.5 4.5
Viscosity at 40oC cSt P : 25 28.8 – 35.2 41.8 – 50.2 61.2 – 74.8 90 – 110 135 –

165
Viscosity Index P: 56 98 98 97 97 96
Flash Point COC oC P: 69 210 215 225 230 230
TAN mg KOH/ gm (Max.) P:2 1.5 1.5 1.5 1.5 1.5
Rust Preventive characteristics ASTM D 665 B  

Pass

  

Pass

  

Pass

  

Pass

  

Pass
 

Pour Point Max.

  

P:10

  

-9

  

-6

  

-6

  

-3

  

-3
Emulsion Characteristics. ASTM D 1401 40-37-3

(20)

 40-38-2 (

20)

 40-37-3

(30)

 40-37-3

(30)

 40-37-3

(30)
Copper strip corrosion @ 100°C / 3 hrs P:15 Not worse than no.1